Install Php Mbstring Extension Debian Screenshots

04.01.2020admin

How do I install the dom extension for PHP7? 'laravel/framework v5.4.6 requires ext-mbstring * -> the requested PHP extension mbstring is missing from your system. There will be many more extensions listed in the php -m output than are installed as add-on packages in Debian, because there are lots of default extensions built into PHP as well as the ones you can install afterwards. I can't install php7.0-mbstring: The following packages have unmet dependencies: php7.0-mbstring: Depends: php7.0-common (= 7.0.19-1) but 7.0.20-1~dotdeb+8.2 is to be installed E: Unable to. Which your list of repositories no longer knows about, and which is preventing you from installing the Debian 9 PHP packages. How to install PHP extensions on linux server? Hi, As in title, I've downloaded a PHP extension, but I have no idea how to install it, can you help? Yum install php-gd yum install php-mbstring via SSH.You need to remove php from yum exclude list (yum.conf). I've ran that command, but I'm getting an error, Here's a screenshot. How to install PHP extensions on linux server? Yum install php-gd yum install php-mbstring via SSH.You need to remove php from yum exclude list (yum.conf. First you need to install that specific extension, i.e. Place its DLL file 'php-mbstring.dll' into the '/php/ext/' directory if it is not already present there. When you do that, make sure you have the correct build of DLL file. 32-bit, thread-safe PHP binary, built using VC9 for example, would only work with DLL files built using exact same.

Php Mbstring Extension
Install Php Mbstring
Yum Install Php Mbstring

Active3 years ago

I am using PHP 5.6 on my centos-release-6-8.el6.centos.12.3.x86_64 server.

Activating mbstring in PHP after installing extension. Ask Question. Up vote 2 down vote favorite. Yum install php-mbstring service httpd restart.

I got following error from one of my PHP function.

So, I tried to install mbstring extension. when I execute

CLI returns

And I aslo tried 'sudo yum install php56-mbstring'This returns

But still, PHP function giving me that error and there is no 'mbsting' in phpinfo()

I also add the following line to httpd.conf

Server Restarted

Update:

Nothing returns to php -m grep mbstring & php -i grep mbstring

Sadee

SadeeSadee

1 Answer

Installing PHP extensions/modules via RPM will install the library files into /usr/lib64/php/modules/. Running php -i grep ^extension_dir shows the extension directory that is currently configured.

An extension directory of /usr/local/lib/php/extensions/no-debug-non-zts-20131226 indicates that at some stage in the past, PHP was installed from source and that a php.ini file relating to this source installation is currently being used instead of the /etc/php.ini provided by the php-common package.

To solve this problem, you should remove the remnants of this source installation. Unfortunately, the Makefile provided with PHP source code doesn’t include an uninstall target so you can’t simply run make uninstall. I’d suggest using the find command to track down these files by their modification date.

Anthony GeogheganAnthony Geoghegan

Not the answer you're looking for? Browse other questions tagged linuxcentosphpphp.iniphp-extensions or ask your own question.

This tutorial exists for these OS versions

Debian 9 (Stretch)

Debian 9 ships with PHP 7.0 as default PHP version. Major PHP versions are not 100% compatible with each other, so a website might require a newer or older PHP version to work. ISPConfig supports it to use multiple PHP versions on the same server, the PHP version can be selected for each website individually in the website settings. This tutorial shows how to install PHP 7.1, 7.2, and 5.6 as FPM and FCGI mode alongside PHP 7.0 on a Debian 9 server. The additional PHP versions are installed in the /opt folder, so their installation does nit affect the default PHP version

1 Preliminary Note

I will install PHP 7.1, 7.2 and 5.6. Please note that PHP-FPM can be used on both Apache and Nginx servers while FastCGI is available only for Apache servers.

2 Install the prerequisites

Install the prerequisites for building PHP and the nano editor that I will use to edit the config files:

(The last command is needed if you build PHP with --with-imap, because otherwise ./configure will stop with the following error:

)

3 Compile PHP 7.1 as PHP-FPM and Fastcgi

Download and extract PHP archive:

Configure and build PHP 7.1 as follows (you can adjust the ./configure command to your needs, take a look at

to see all available options; if you use a different ./configure command, it is possible that additional libraries are required, or the build process will fail):

The last switch (--enable-fpm) makes sure this PHP version will work with PHP-FPM.

Copy php.ini and php-fpm.conf to the correct locations:

Open /opt/php-7.1/etc/php-fpm.conf and adjust the following setting (remove the ; in front of the pid line):

Then open /opt/php-7.1/etc/php-fpm.d/www.conf and adjust the listen line, you must use an unused port (e.g. 8999; port 9000 might be in use by Debian's default PHP-FPM already):

3.1 Create the systemd unit file

Next, we'll create the system unit file which is used to start and stop the PHP-FPM daemon.

with the following content:

Enable the service and reload systemd:

Finally, start PHP-FPM.

To enable the Zend OPcache, open /opt/php-7.1/lib/php.ini..

.. and add the following line at the end:

3.2 Enable Memcache (optional)

In this chapter, I will compile and enable the PHP Memcached extension.

The first step is to install the libmemcached-dev package from Debian.

Then create a diretory, download the PHP memcache extension from Github, unpack the archive and enter the directory that contains the unpacked files.

Prepare he sources by running the phpize command from PHP 7.1.

Configure and build the PHP memcache extension.

To enable the Memcache extension, open/opt/php-7.1/lib/php.ini..

.. and add the following line at the end:

3.3 Install xDebug extension (optional)

ThexDebug module is a debugging extension for PHP. The installation is optional.

Install xDebug with these commands.

Then edit the php.ini file with an editor:

and add the following line at the end of the file:

Finally restart the php-fpm daemon:

Test the PHP version:

The output should be similar to this screenshot. Hp 850c driver download.

Please note: The screenshot is from PHP 7.1.14, the tutorial gets updated continuously for new PHP versions but we don't take new screenshots each time, so the PHP version that you will see on your server might be newer. The current version of this tutorial is for php-7.1.14.

3.4 Enable PHP 7.1 in ISPConfig

In ISPConfig 3.1, you can configure the new PHP version under System > Additional PHP Versions. On the Name tab, you just fill in a name for the PHP version (e.g. PHP 7.1) - this PHP version will be listed under this name in the website settings in ISPConfig:

Go to the FastCGI Settings tab and fill out the fields as follows:

Then g to the PHP-FPM Settings tab and fill out the fields as follows:

4 Compile PHP 7.2 as PHP-FPM and Fastcgi

Download and extract PHP from php.net and unpack the tar.bz2 file:

Configure and build PHP 7.2 as follows (you can adjust the./configurecommand to your needs, take a look at

Binatone e3300 bedienungsanleitung pdf printer. to see all available options; if you use a different./configurecommand, it is possible that additional libraries are required, or the build process will fail):

The last switch (--enable-fpm) makes sure this PHP version will work with PHP-FPM.

Copyphp.iniandphp-fpm.confto the correct locations:

Open/opt/php-7.2/etc/php-fpm.confand adjust the following setting (remove the ; in front of the pid line):

Then open /opt/php-7.2/etc/php-fpm.d/www.conf and adjust thelistenline, you must use an unused port (e.g.8998; port9000might be in use by Debian's default PHP-FPM already):

4.1 Create the systemd unit file

Next, we'll create the system unit file which is used to start and stop the PHP-FPM daemon.

with the following content:

Enable the service and reload systemd:

Finally, start PHP-FPM.

Install Php Mbstring Extension Debian Screenshots

To enable the Zend OPcache, open/opt/php-7.2/lib/php.ini..

.. and add the following line at the end:

4.2 Enable Memcache (optional)

In this chapter, I will compile and enable the PHP Memcached extension.

The first step is to install the libmemcached-dev package from Debian.

Then create a diretory, download the PHP memcache extension from Github, unpack the archive and enter the directory that contains the unpacked files.

Prepare he sources by running the phpize command from PHP 7.2.

Configure and build the PHP memcache extension.

To enable the Memcache extension, open/opt/php-7.2/lib/php.ini..

.. and add the following line at the end:

Php Mbstring Extension

4.3 Install xDebug extension (optional)

ThexDebug module is a debugging extension for PHP. The installation is optional.

Install xDebug with these commands.

Then edit the php.ini file with an editor:

and add the following line at the end of the file:

Finally restart the php-fpm daemon:

Test the PHP version:

The output should be similar to this screenshot.

Please note:The screenshot is from PHP 7.2.2, the tutorial gets updated continuously for new PHP versions but we don't take new screenshots each time, so the PHP version that you will see on your server might be newer. The current version of this tutorial is for php-7.2.2.

4.4 Enable PHP 7.2 in ISPConfig

In ISPConfig 3.1, you can configure the new PHP version underSystem > Additional PHP Versions. On theNametab, you just fill in a name for the PHP version (e.g.PHP 7.2) - this PHP version will be listed under this name in the website settings in ISPConfig:

Go to theFastCGI Settingstaband fill out the fields as follows:

Then g to thePHP-FPM Settingstab and fill out the fields as follows:

5 Compile PHP 5.6 as PHP-FPM and Fastcgi

Download PHP and unpack the tar.bz2 archive:

The OpenSSL version in Debian 9 is too new for PHP 5.6, so we'll have to compile an older version in /opt/openssl to use it with PHP 5.6.

Create a symlink so PHP will find the freetype, libcrypto and libssl libraries.

Enter the folder which contains the unpacked PHP source files.

Configure and build PHP 5.6 as follows (you can adjust the./configurecommand to your needs, take a look at

to see all available options; if you use a different./configurecommand, it is possible that additional libraries are required, or the build process will fail):

The last switch (--enable-fpm) makes sure this PHP version will work with PHP-FPM.

Copyphp.iniandphp-fpm.confto the correct locations:

Open/opt/php-5.6/etc/php-fpm.confand adjust the following setting:

5.1 Create the systemd unit file

Next, we'll create the system unit file which is used to start and stop the PHP-FPM daemon.

with the following content:

Enable the service and reload systemd:

Finally, start PHP-FPM.

To enable the Zend OPcache, open/opt/php-5.6/lib/php.ini..

.. and add the following line at the end:

5.2 Enable Memcache (optional)

In this chapter, I will compile and enable the PHP Memcached extension.

The first step is to install the libmemcached-dev package from Debian.

Then run these commands to build the memcache extension

To enable the Memcache extension, open/opt/php-5.6/lib/php.ini..

.. and add the following line at the end:

Finally restart the php-fpm daemon:

Test the PHP version:

The output should be similar to this screenshot.

Please note:The screenshot is from PHP 5.6.33, the tutorial gets updated continuously for new PHP versions but we don't take new screenshots each time, so the PHP version that you will see on your server might be newer. The current version of this tutorial is for php-5.6.33.